FAQ: SuperBase Pro: Fastest Recharge IoT Power Station
For the most up-to-date information about the status of our project, check our project updates on Indiegogo!

What kind of batteries does SuperBase Pro use?

SuperBase Pro 2000 uses NMC (LiNiMnCoO2) batteries with a total charge capacity of 2,096Wh, while SuperBase Pro 1500 uses LFP (LiFePO4) batteries and has a charge capacity of 1,456Wh.

Last updated: August 12, 2021 23:17

What's the difference between SuperBase Pro 1500 and SuperBase Pro 2000?

SuperBase Pro 1500 has a different battery type and capacity from SuperBase Pro 2000. Because of this, the two products have different charging and discharging times.

Last updated: August 12, 2021 23:17

What is the operating temperature of SuperBase Pro?

Discharge -20°C to +60°C (-4°F to 140F) / Charge 0°C to 45°C (32°F to 113°F)

Last updated: August 12, 2021 23:17

Does SuperBase Pro have a built-in MPPT controller?

Yes, it does.

Last updated: August 12, 2021 23:17

What's the noise level?

SuperBase Pro maxes out to about 52dB at 1 meter, but we are still testing this.

Last updated: August 12, 2021 23:17

Can two products be used in parallel?

Not yet. We will develop it in the coming future.

Last updated: August 12, 2021 23:17

Are there any patented technologies?

Yes, GridFlow, PVMax, and AmpUp.

Last updated: August 12, 2021 23:17

What is "sleep mode"?

With sleep mode on, the input power is limited to 300W to reduce fan activity and the ambient light and sounds are turned off.

Last updated: August 12, 2021 23:17

What is the case made of?

The case is made with PC+ABS V0 flame retardant material and environmentally friendly paint.

Last updated: August 12, 2021 23:17

Are the wheels replaceable?

SuperBase Pro’s industrial-grade wheels are built into the product and are not replaceable.

Last updated: August 12, 2021 23:17

Are there built-in fans?

Yes, there are 4 smart fans, which only run when necessary to keep the operating temperature at an appropriate level. Using the app, you can tell SuperBase Pro to prioritize either high performance or low noise.

Last updated: August 12, 2021 23:17

Can SuperBase Pro be charged by other solar panels?

Yes, SuperBase Pro can be charged by other solar panels with voltage ranging from 1)12V to 60V up to 600W via the XT60 port; 2)60V-160V up to 1800W via the AC input; Zendure’s 200W solar panel has been thoroughly tested with SuperBase Pro and remains our recommendation.

Last updated: August 12, 2021 23:17

Should I charge my SuperBase Pro to 100% right away?

The BMS (Battery Management System) needs to familiarize itself with the internal cells, so you might find that your SuperBase Pro will not charge to 100% on the first charge cycle. If you discharge the battery below 60% and try to fully recharge the battery twice, this should complete the process and give you access to the battery’s full capacity. After this, normal usage will not be affected.

Last updated: August 12, 2021 23:17

Can SuperBase Pro power high-wattage devices?

Yes, with patented AmpUp mode, SuperBase Pro can power devices that require up to 3,000W without the disruption typically caused by overload protection.

Last updated: August 12, 2021 23:17

Can SuperBase Pro be used as an Uninterruptible Power Supply (UPS)?

Yes, SuperBase Pro supports entry-level UPS functionality. We recommend testing any sensitive devices before fully relying on the UPS feature.

Last updated: August 12, 2021 23:17

How many colors and modes are available with the ambient light?

There are 10 preset colors and 5 modes, and more to be developed.

Last updated: August 12, 2021 23:17

How do I connect to SuperBase over Wi-Fi?

SuperBase Pro can communicate with your mobile device either directly, or by connecting both devices to the same Wi-Fi network.

Last updated: August 12, 2021 23:17

Is an IoT network available out of the box?

Yes, SuperBase Pro comes with one year of IoT service that works in over a hundred countries.

Last updated: August 12, 2021 23:17

Do I have to pay for IoT service?

After the first year of service, you can extend your service plan through Zendure for $9.9 per month.

Last updated: August 12, 2021 23:17

Will the IoT features consume a lot of power?

SuperBase Pro has a “heartbeat mode” to balance to maximize availability with minimal impact on power usage.

Last updated: August 12, 2021 23:17

What location-based services can SuperBase Pro provide?

You can use SuperBase Pro’s location-based services to protect against theft, find your SuperBase Pro, find other SuperBase Pro users nearby, and more.

Last updated: August 12, 2021 23:17

I cannot find the answer on the FAQ.

Please get in touch with us directly via [email protected]

Last updated: August 12, 2021 23:17

Shipping Updates
For the most up-to-date information about the status of our project, check our project updates on Indiegogo!
No shipping updates are provided.
BackerKit FAQ

What is BackerKit?

BackerKit is a service that crowdfunded project creators use to keep track of hundreds to tens of thousands of backers—from shipping details, pledge levels, preferences and quantities, whether they have paid or had their card declined, special notes, and everything in between!

The BackerKit software and support team is independent from the campaign’s project team—BackerKit does not handle the actual reward shipping. For more information about the preparation or delivery status of your rewards, please check the project's updates page.

How does BackerKit work?

After the campaign ends, the project creator will send you an email with a unique link to your survey. You can check out a walkthrough of the process here.

I never received my invitation. How do I complete the survey?

The most common reasons for not receiving a survey email is that you may be checking an email inbox different from the email address you used to sign up with Kickstarter, Indiegogo or Tilt Pro account, or it may be caught in your spam filter.

Confirm that the email address you are searching matches the email address tied to your Kickstarter, Indiegogo, or Tilt Pro account. If that doesn’t work, then try checking your spam, junk or promotions folders. You can also search for "backerkit” in your inbox.

To resend the survey to yourself, visit the project page and input the email address associated with your Kickstarter, Indiegogo or Tilt Pro account.

How do I update my shipping address?

BackerKit allows you to update your shipping address until the shipping addresses are locked by the project creator. To update your address, go back to your BackerKit survey by inputting your email here.

When will my order be shipped, charged or locked?

That is handled directly by the project creator. BackerKit functions independently of the project itself, so we do not have control of their physical shipping timeline. If you want to check on the project’s status, we recommend reading over the project's updates page.

I completed the survey, but haven't received my rewards yet. When will they arrive?

As BackerKit does not actually handle any rewards or shipping, the best way to stay updated on the shipping timeline would be to check out the project's updates page.

Contact Us